Hi community,
I currently purchased a 2nd Dell server and have installed Esxi 6.7 on it and soon am planning to install v-center appliance 6.7 as well.
We currently have essentials kit license and one existing Dell server esxi host (6.5) running a few VMs.
I would like some input on the community experience on the best way to set things up so that if one VM fails on my existing host, I will be able to quickly migrate to the 2nd host.
I understand I do not have v-motion with the v-sphere essentials kit, so looking to leverage my existing Veeam B&R platform to help with redundancy and possibly restore VMs to a new location? if that is possible.
Existing dell server host networking is setup like this
- Management Network - vswitch0 - vmnic0 (physical) - 1 gig port (VLAN- 100)
- Production Network - vswitch1 - vmnic1& vnmic2 (physical) - 1 Gig ports (VLAN-1)
-- 2 x SSDs + 6 x HDDs (two datastores)
New dell server host networking not yet setup but it has these physical ports that i could use in any fashion.
vmnic0 - 10 gig (teaming)---> thinking of assigning to Prod Network and put on VLAN 1
vmnic1 - 10 gig (teaming)
vnmnic2 - 1 gig (thinking of using this for Mgmt and put on the same MGMT VLAN 100 as my 1st host)
-- 2 x SSDs + 6 x HDDs (two datastores)
Question
1. Am i able to achieve some sort of decent redundancy with the above hosts + licenses/budget?
2. Does it make sense to install v-center appliance on the new Dell server, add both hosts? and manage them from the v-center console?
3. Should i update my 1st host to 6.7 first? before adding to the v-center?
4.. will the difference in NIC speeds on both hosts impact anything? in terms of relocating VMs from one host to the other?
5. any other words of wisdom would be appreciated
thx