The results get by snmpwalk are garbled.

Hi,

When I do snmpwalk to velocloud edge , results in below field are garbled.

-----------------------------------------------------------------------------------------------------------------------------------

VELOCLOUD-EDGE-MIB::vcePathRxAveLatency.'....Y.G...rl...P'.ipv4."192.168.50.1" = INTEGER: 0

VELOCLOUD-EDGE-MIB::vcePathRxBytes.'....Y.G...rl...P'.ipv4."192.168.50.1" = Counter64: 114812262

VELOCLOUD-EDGE-MIB::vcePathTxBytes.'....Y.G...rl...P'.ipv4."192.168.50.1" = Counter64: 110153996

VELOCLOUD-EDGE-MIB::vcePathRxLostPkt.'....Y.G...rl...P'.ipv4."192.168.50.1" = Counter64: 0

VELOCLOUD-EDGE-MIB::vcePathTxLostPkt.'....Y.G...rl...P'.ipv4."192.168.50.1" = Counter64: 0

VELOCLOUD-EDGE-MIB::vcePathRxPkt.'....Y.G...rl...P'.ipv4."192.168.50.1" = Counter64: 1595739

VELOCLOUD-EDGE-MIB::vcePathTxPkt.'....Y.G...rl...P'.ipv4."192.168.50.1" = Counter64: 1565644

VELOCLOUD-EDGE-MIB::vcePathRxJitter.'....Y.G...rl...P'.ipv4."192.168.50.1" = Counter64: 1

VELOCLOUD-EDGE-MIB::vcePathTxJitter.'....Y.G...rl...P'.ipv4."192.168.50.1" = Counter64: 0

--------------------------------------------------------------------------------------------------

Other field is normal.

----------------------------------------------------------------------

VELOCLOUD-EDGE-MIB::vceHaPeerState.0 = INTEGER: unknown(4)

VELOCLOUD-EDGE-MIB::vceHaActiveWanItfNum.0 = INTEGER: 2

VELOCLOUD-EDGE-MIB::vceHaActiveLanItfNum.0 = INTEGER: 2

VELOCLOUD-EDGE-MIB::vceHaStanbyWanItfNum.0 = INTEGER: 0

VELOCLOUD-EDGE-MIB::vceHaStanbyLanItfNum.0 = INTEGER: 0

VELOCLOUD-EDGE-MIB::vceCpuUtilPct5min.0 = INTEGER: 11

VELOCLOUD-EDGE-MIB::vceCpuUtilPct30sec.0 = INTEGER: 11

VELOCLOUD-EDGE-MIB::vceMemUsedPct.0 = INTEGER: 35

------------------------------------------------------------------------

Are there any workarounds?

And Why do results happen?

Any help will be appreciated.

Thanks.